MID WiFi (Free) Version 3.0.1

Evaluation version of MID WiFi and Marine Instrument Display.

Marine Instrument Display WiFi enables users to create, follow, and transfer routes, track paths, control autopilot functions, receive, store, and forward NMEA0183 data over WiFi, and view AIS targets on the map. It also allows sending and receiving data through iCloud for functions such as remote anchor alarms.

MID WiFi introduces the pioneering autopilot controller app for the Apple Watch.

Search for the Lite version of Marine Instrument Display to access additional features.

FEATURES

• Compass Heading (mag/true) (HDG)
• Clock (utc/local) (CLK)
• Course Over Ground (COG)
• Speed Over Ground (SOG)
• Average SOG (ASOG)
• Maximum SOG (MSOG)
• Trip Distance (TRIP)
• Trip Time (TIME)
• Countdown Timer (CDT)
• Distance to Line (DTL)
• Time to Line (TTL)
• Barometric Pressure (BPR) (NMEA or iPhone6->)
• Bearing to Waypoint (BTW)
• Distance to Waypoint (DTW)
• Time to Waypoint (TTG)

• Cross Track Error (XTE)
• Velocity Made Good to Waypoint (VMGwpt)
• Heeling (HLG)

• Position

• - Apparent Wind Angle and Speed (AWA, AWS) - True Wind Angle and Speed (TWA, TWS) - Maximum Apparent/True Wind Speed (MAWS, MTWS) - True Wind Direction (TWD) - Velocity Made Good to Wind (VMGwnd) - Boat Speed (SPD) - Maximum Boat Speed (MSPD) - Depth (DPT) - Air and Sea Temperatures (AIR, SEA) - Predicted Boat Speed (PSPD) - Boat Speed to Predicted Boat Speed Ratio (SPR) - Revolutions Per Minute (Engine/Shaft) (RPM) - Propeller Pitch (PRP) - NoLand Eng. Analog Values (EAV1-5) - TackTick FFP1-4 - Rate of Turn (ROT) - Fluid Levels (TANKS)

• * = Internal GPS or NMEA-WiFi bridge required

• ** = NMEA-WiFi bridge required e.g., Vesper Marine XB-8000 and WatchMate Vision, Simrad GoFree WIFI-1, RS232-WiFi, Digital Yacht iAIS/WLN10, ShipModul MiniPlex-2/3Wi, PilotsTech PilotPlug, iMux, Ockam LANbridge

WIND VIEW

• - Displays Apparent and True Wind Angles simultaneously - Blue sector size indicates wind direction variation - Red dot denotes Bearing to Waypoint

MAP VIEW

• - AIS targets - Create and follow routes - Transfer routes using NMEA - Create and replay tracks - Autopilot control for Raymarine devices (requires MiniPlex-3Wi) - Share tracks and data via email in GPX and NMEA formats - Access stored NMEA data using iTunes File Sharing

ALARMS

• - Depth alerts for Deep and Shallow scenarios - Anchor alerts for Deep/Shallow water and Distance parameters - Wind alerts for AWA/TWA/AWS/TWS High/Low parameters and TWD Shift

HOW TO USE

• - Tap SET to access the Settings page - Tap any field value to cycle through color modes - Tap/swipe the title of a field like TIME to select corresponding data - Tap a unit to cycle through unit modes - Calibrate the heeling angle by tapping its unit field° - Press any field value for at least two seconds to reset TIME, ASOG, MSOG, and TRIP values - Rename routes or tracks by tapping their names - Use IP address 255.255.255.255 for UDP broadcast/multicast. Ports include 2050 or 2052 for Simrad GoFree discovery, 5000-5010 for Ockam LANbridge, and 55554 for SailTimer Wind Vane - Use IP address 127.0.0.1 with port 55554 for SailTimer Wind Instrument - Forward NMEA0183 data as UDP multicast to other devices

• - Trip time runs while moving (>0 SOG) and COG is displayed when moving (>0 SOG)

COUNTDOWN TIMER

• - Set start time from 1 to 30 minutes in Settings view - Start/sync the timer by touching "sync" - Stop the timer by touching "sync" for at least two seconds - Timer beeps at every minute mark and when reaching 50, 40, 30, 20, 10, 5, 4, 3, 2, 1 seconds remaining

CALIBRATION

1. The back cover must face forward accurately for correct compass heading.
2. Securely mount the iPhone/iPad to prevent accidental movement in any direction.
3. To calibrate heeling angle: tap HLG's unit field° for zero angle display.

Note: Prolonged GPS usage in the background can significantly reduce battery life.